Difficulty
Average
Candidate-reported interview insights
Analog Bits Analog / Mixed Signal Engineer interviews, decoded.
Explore commonly reported questions, interview rounds, difficulty, duration, and candidate experiences for the Analog / Mixed Signal Engineer role at Analog Bits.
4.2 rating Electronics Manufacturing
Interview overview
Average rounds
2.4
Average duration
~44 days
Difficulty and candidate experience
Interview difficulty
easy12.5%
average50%
difficult37.5%
Candidate experience
negative50%
positive25%
neutral25%
Candidate-reported interview process
The interview experience was not good. I found the questions to be repetitive and outdated, similar to those asked on Glassdoor for years. The interviewer was impatient and unhelpful, offering no hints when I struggled with a question.
The interview process consisted of 5 technical interviews, each lasting an hour. These were conducted by team members and covered a range of topics testing analog electronics fundamentals and circuit intuition, including both analog and digital questions.
It was a horrible experience. They called me for 4 onsite interviews, which is quite unusual. Each onsite had about 2 interviewers. One interviewer, who sounded Gujarati, seemed to be there just to put me down. The interviews started around 11-12 and went on until 1:30 PM, at which point I had to leave because I couldn't take 4 days off work.
Common Analog Bits Analog / Mixed Signal Engineer interview questions
A focused selection of the most detailed candidate-submitted questions.
- 1
When two NMOSs (NMOS1 and NMOS2) are connected at their drains, and Vg1=3V, Vg2=4V, Vs1=5V, what is the voltage at Vs2? What is the working region of NMOS2?
- 2
If the gate voltage of nmos is 3V, drain voltage is 5V, and Vth = 0.5V, what will the source voltage be in the end?
- 3
What happens when NMOS and PMOS sources are connected to ground and VDD, and then removed?
- 4
What will be Vs if VD of NMOS is 5V and Vg=5V, 2.5V, and the source seems floating?
Interview question formats
Technical57.1%
Coding42.9%
Ready to prepare for Analog Bits?
Practice technical, system design, and behavioral questions with Zitlee.
Interview information is based on candidate reports and may not represent the current official hiring process of Analog Bits.